View PTC04-DB-FASTLOADER_9035550.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ptc04 programmer for melexis ptc devices 3901290014501 page 1 of 15 data s heet rev 004 december/14 1. features and benefits universal programming utility fast development fast plug - in for software applications atmega128 core firmware updatable via rs232 and usb fpga updatable via rs232 and usb 3 high current programmable supplies 1 high speed fast programm able supply 16 bit level settings 16 bit differential measurements 4 analog comparators vector generator i2c to daughter board mountable in 19 rack 2. application examples experimental tool for lab and prototyping production equipment for serial programmi ng programming tool for characterization 3. ordering information product code description ptc04 programmer unit (full set: including adapter, cables, software) ptc04 - db - hall01 daughter board 1st generation linear hall sensors products ptc04 - db - hall03 dau ghter board 2nd generation linear hall and current sensors ptc04 - db - hall04 daughter board psi5 interface products ptc04 - db - hall05 daughter board current sensor products ptc04 - db - 90316 daughter board triaxis sensor products ptc04 - db - pressure01 daughter board pressure sensors products ptc04 - db - spi daughter board spi interface products ptc04 - db - fastloader daughter board lin interface products ptc04 - db - xxxxx other daughter boards for future products ptc04 - 19 - x (with x equal to 1 till 4) 19rack with bui ld in x number of ptc04 4. accessories product code description ptc04 - testbench - magnetic magnetic utility for evaluating samples on ptc04 ptc - testbench - 4sip - 0x pcb with 4sip socket ptc - testbench - tssop - so8 - 0x pcb with so socket and tssop socket magnet - t0 1 magnet for testing vertical packaged devices (4sip - va, vb and vc) magnet - t02 magnet for testing horizontal packaged devices with a perpendicular field (so, tssop) magnet - t03 magnet for testing horizontal packaged devices with a rotating field (so, tss op) magnet - t04 magnetic coil for testing horizontal packaged devices with a perpendicular field (so, tssop) software environment mpt (windows) including calibration software and update tools
ptc04 programmer for melexis ptc devices 3901290014501 page 2 of 15 data s heet rev 004 december/14 product code description dll for mini - tester (windows) dlls for all supported prod ucts (windows) user interface for most support products (windows) 5. functional diagram figure 5 - 1 ptc04 functional block diagram 6. general description the ptc - 04 programmer was designed for efficient, pr ecise c alibration of the melexis families of programmable ics. the programmer is designed to be easily adapted to a standard pc and to an application module to allow calibration of programmable sensor ics within the operating environment. the ptc - 04 progra mmer contains its own programmable power supply and measurement circuitry. the programmer is similar to a standard ee prom programmer, but adds many special features such as 16 bit voltage and current measurement capability, and configuration options that w ill accommodate users from the prototyping phase directly into production. an ibm compatible pc is required (not included) to load software to the p rogrammer and control the functions of the programmer. communication is done through a standard rs - 232 null modem cable to a com port of the pc or via usb. the pc requires no custom configuration, allowing the programmer to be used with any pc with a com port speed of 115.2kbs or a standard usb 1.1 or usb 2.0 interface
ptc04 programmer for melexis ptc devices 3901290014501 page 3 of 15 data s heet rev 004 december/14 7. table of contents 1. features and benefits ................................ ................................ ................................ ................................ ................................ 1 2. application examples ................................ ................................ ................................ ................................ ................................ . 1 3. ordering information ................................ ................................ ................................ ................................ ................................ .. 1 4. accessories ................................ ................................ ................................ ................................ ................................ ............... 1 5. functional diagram ................................ ................................ ................................ ................................ ................................ .... 2 6. general description ................................ ................................ ................................ ................................ ................................ ... 2 7. table of contents ................................ ................................ ................................ ................................ ................................ ...... 3 8. glossary of terms ................................ ................................ ................................ ................................ ................................ ..... 4 9. absolute maximum ratings ................................ ................................ ................................ ................................ ....................... 4 10. ptc04 electrical specifications ................................ ................................ ................................ ................................ ............. 4 10.1 system power supply ................................ ................................ ................................ ................................ ....................... 4 10.2 programmable high current power supply 1 - 3 ................................ ................................ ................................ ................. 5 10.3 programmable fast power supply ................................ ................................ ................................ ................................ .... 5 11. measurement system ................................ ................................ ................................ ................................ ............................ 6 12. function timings ................................ ................................ ................................ ................................ ................................ ... 6 13. unique features ................................ ................................ ................................ ................................ ................................ .... 6 13.1 mini - tester ................................ ................................ ................................ ................................ ................................ ........ 6 13.2 analogue vector generator ................................ ................................ ................................ ................................ ............... 6 13.3 acquisition memory ................................ ................................ ................................ ................................ ........................... 7 13.4 port e atmega 128 ................................ ................................ ................................ ................................ ............................. 7 14. main board description ................................ ................................ ................................ ................................ ......................... 7 14.1 board layout ................................ ................................ ................................ ................................ ................................ .... 7 14.2 powe r supplies ................................ ................................ ................................ ................................ ................................ . 8 14.3 power supply system check ................................ ................................ ................................ ................................ ............ 8 14.4 supply connector ................................ ................................ ................................ ................................ ............................. 8 14.5 led indicators ................................ ................................ ................................ ................................ ................................ .. 8 14.6 usb connector ................................ ................................ ................................ ................................ ................................ . 9 14.7 rs 232 connector ................................ ................................ ................................ ................................ ............................ 9 14.8 reset button ................................ ................................ ................................ ................................ ................................ ..... 9 14.9 daughter board connectors ................................ ................................ ................................ ................................ .............. 9 14.9.1 digital db connector (40 pins) ................................ ................................ ................................ ............................... 10 14.9.2 analog db connector (48 pins) ................................ ................................ ................................ .............................. 10 15. daughter board concept ................................ ................................ ................................ ................................ ...................... 11 15.1 background ................................ ................................ ................................ ................................ ................................ ..... 11 15.2 requirements ................................ ................................ ................................ ................................ ................................ .. 11 16. rs 232 communication with host ................................ ................................ ................................ ................................ ........ 11 16.1 connector ................................ ................................ ................................ ................................ ................................ ....... 11 16.2 cable ................................ ................................ ................................ ................................ ................................ .............. 11 16.3 settings ................................ ................................ ................................ ................................ ................................ ........... 12 17. usb communicatio n with host ................................ ................................ ................................ ................................ ............ 12 17.1 connectors ................................ ................................ ................................ ................................ ................................ ..... 12 17.2 cable ................................ ................................ ................................ ................................ ................................ .............. 12 17.3 settings ................................ ................................ ................................ ................................ ................................ ........... 12 18. measurement system ................................ ................................ ................................ ................................ .......................... 13 18.1 channels ................................ ................................ ................................ ................................ ................................ ......... 13 18.2 conversion time ................................ ................................ ................................ ................................ .............................. 13 18.3 accuracy ................................ ................................ ................................ ................................ ................................ ......... 13 19. application information ................................ ................................ ................................ ................................ ........................ 14 20. faq ................................ ................................ ................................ ................................ ................................ ..................... 14 21. mechanical outlines ................................ ................................ ................................ ................................ ............................ 14 22. esd precautions ................................ ................................ ................................ ................................ ................................ . 14 23. disclaimer ................................ ................................ ................................ ................................ ................................ ........... 15 24. contact information ................................ ................................ ................................ ................................ ............................. 15
ptc04 programmer for melexis ptc devices 3901290014501 page 4 of 15 data s heet rev 004 december/14 8. glossary of terms ptc04 the programmer (including the applicable db) db daughter board ptc pps mpt psf dll program through con nector programmable power supply melexis programmable toolbox product specific function library (dll) dynamic - link library 9. absolute maximum r atings parameter value units supply voltage (external input) v s ext 48 v reverse voltage protection yes sup ply current i s fused 1 a pps 1,2,3 output voltage v pps 34 v pps 1,2,3 output current (peak value) i pps 500 ma pps 4 output current (peak value) i pps 50 ma operating temperature range ta 25 c operating temperature range ts 0 ? c C 55 c table 1 : absolute maximum ratings exceeding the absolute maximum ratings may cause permanent damage. exposure to absolute maximum rated conditions for extended periods may affect device reliability. 10. ptc04 electrical specifications 10.1 system power su pply dc operating parameters t a = 25 - 35 o c, v ext = 48v (unless otherwise specified) parameter symbol test conditions min typ max units dc system power supply vext_in 23 48 48.2 v system current consumption iext_in 0.1 1.2 a daughter board analog pow er supply * 36 v 500 ma daughter board digital power supply 5 v 500 ma table 2 : general electrical parameters *depends on dc system power supply
ptc04 programmer for melexis ptc devices 3901290014501 page 5 of 15 data s heet rev 004 december/14 10.2 programmable high current power supply 1 - 3 dc operating parame ters t a = 25 - 35 o c, v ext = 48v (unless otherwise specified) parameter symbol test conditions min typ max units output voltage range * vpps 1 - 3 unloaded 0.62 34.00 v output resolution 0.52 mv output current (peak value) ipps 1 - 3 - 500 500 ma curre nt limit range i limpps 1 - 3 - 500 500 ma settling time unloaded 10 20 us voltage source swing pps1 - pps3 vout i out = 10ma 0.035 34 v i out = 100ma 0.2 32.5 v i out = 500ma 1.15 26 v i out = - 10ma 1.14 34 v i out = - 100ma 2.3 30 v i out = - 500ma 9.46 30 v voltage source accuracy pps1 - 3, i out = 10ma - 1 - 1.05 +1 +1.05 % mv voltage source slew rate pps1 - 3, c load = 100nf pps1 - 3, c load = 1uf between 20 & 80% 2.5 0.5 v/us table 3 : programmable high curre nt power supply 1 - 3 *depends on the dc system power supply 10.3 programmable fast power supply dc operating parameters t a = 25 - 35 o c, v ext = 48v (unless otherwise specified) parameter symbol test conditions min typ max units output voltage range vpps 4 when fast dac = 255 0.37 13 v output resolution 0.2 mv output current (peak value) ipps 4 - 20 20 ma fast dac resolution divider between pos and neg voltage 8 bits settling time this is taken by changing the fast dac only 0.5 5 us voltage source swing pps4 vout i out = 10ma i out = 50ma 1 0.5 13 10 v voltage source accuracy pps4, i out = 10ma - 1 - 0.8 +1 +0.8 % mv voltage source slew rate using 8 bit fast dac pps4, c load = 100nf pps4, c load = 1uf between 20 & 80% 0.25 0.08 v/us table 4 : programmable fast power supply
ptc04 programmer for melexis ptc devices 3901290014501 page 6 of 15 data s heet rev 004 december/14 11. measurement system dc operating parameters t a = 25 - 35 o c, v ext = 48v (unless otherwise specified) parameter symbol test conditions min typ max units adc channels 16 pin potential - 0.5 3 5.5 v voltage range (full mode) - 37.5 37.5 v resolution (full mode) 1.15 mv accuracy (full mode) - 0.1 - 1.15 +0.1 +1.15 % mv voltage range (fine mode) - 7.8 7.8 v resolution (fine mode) 0.24 mv accuracy (fine mode) - 0.1 - 0.25 +0.1 0 .25 % mv current meter range pps1 - 3 pps4 - 500 - 50 500 50 ma resolution (full mode) pps1 - 3 pps4 77 52 ua current meter accuracy pps1 - 3 pps4 - 2 - 0.312 - 2 - 0.5 +2 0.312 +2 0.5 % ma % ma table 5 : programmable fast power supp ly 12. function timings dc operating parameters t a = 25 - 35 o c, v ext = 48v (unless otherwise specified) parameter symbol test conditions min typ max units voltage source program rate pps1 - 4, using pc software and rs232 interface 20 ms using vector fun ctions 10 us voltage source noise pps1 - 4, peak - to - peak 2 5 mv current measurement sample time firmware only pc software and rs232 0.5 20 ms table 6 : function timings 13. unique features 13.1 mini - tester due to the architecture of the hardware in combination with the software, the ptc04 can be used as a mixed mode tester (with limited performance) . there are library routines (dll) available in order to interface with any software language. (c++, visual basic, lab view, excel (vba)) 13.2 analogue vector generator a vector space of 512kbyte allows you to store a huge amount of actions. these actions consist of setting a level on a channel, waiting a time x, setting the fast d ac and making samples on an analogue input (measurement) or a di gital comparator . for details, refer to the psf of the ptc04 chapter pattern functions.
ptc04 programmer for melexis ptc devices 3901290014501 page 7 of 15 data s heet rev 004 december/14 13.3 acquisition memory an advance library on the analogue vector generators, allows use of the vector area in combination with measurement and setting levels. through this method one may use the ptc04 as a slow data acquisition card. 13.4 port e atmega128 the port e of the atmega128 core is connected fully to the daughter board. with this port, items like critical timing generation measurements can be performed . also, all types of uarts can be configured. other capabilities are possible with the ptc04. for more details, refer to the atmega128 datasheet . 14. main board description 14.1 board layout figure 14 - 1 as shown in figure 2 , the main board can be divided in 4 major areas. ? the supplies where all required voltage and current levels are created ? the digital core that processes all requests from the host computer ? a driver area where the programmable power supplies are located ? a measure ment area where the adc and the input mux are located beside these four areas, there are the input connector on the main board and the two connectors to the daughter board.
ptc04 programmer for melexis ptc devices 3901290014501 page 8 of 15 data s heet rev 004 december/14 14.2 power supplies the power supply input connector is a single input to supply the whole ptc. the input supply requires a minimum of 24 volts and can tolerate a maximum of 48 volts . it is not recommended to use a higher voltage than needed for the application. theres an internal fuse (on the main board) of 1 a in order to avoid damage w hen improperly used. the connected supply should provide a minimum current of 1.5 a with peak capacity to source 10a. the external supply is the source to create all the internal requirements. internal voltages are created on the main board by using the i nput voltage from the external supply. ? +35 v for drivers (for the drivers or programmable power supplies) ? +5v digital (digital core as interface between ptc and host application) ? +5v analog (measurement circuit with mux and adc) ? +3.3 v digital (supply f or the fpga and usb) 14.3 power supply system check when something goes wrong its useful to check the status of all the above mentioned supplies. the main board has the capability to measure all internal supplies. the only requirement is that the +5v digital supply is available. this is indicated by the red led on the rear panel of the programmer. all the other supply could be checked by the measurement system itself. channels 8 till 11 are reserved for this. the channel 8 is connected to the driver supply and is very useful to check the voltages of the connected external supply. this can be useful to check when applications are launched where extra h igh voltage is needed. refer to the chapter measurement system for more details about measuring these channels . there are dll functions available that will do these checks for you. a typical diagnostic check will start with checking if the external supply is available. then it will check if the red led is lit. if these steps are ok, the diagnostics via software c an be executed. 14.4 supply connector this connector provides the ptc with power. any power source that generates a voltage between 24 and 48 v dc with a minimum current of 1.5 a is allowed. figure 14 - 2 there is an alternative connector on the main board (pwrcon1), parallel to the dc power supply socket. figure 14 - 3 14.5 led indicators two led indicators will help the user to check the status of the ptc the red led shows that the core inside has power the green led will show a busy status. if the programmer is executing a job, the led will be on. figure 14 - 4 0 v + 2 4 - 4 8 v d c 0 v + 2 4 - 4 8 v d c
ptc04 programmer for melexis ptc devices 3901290014501 page 9 of 15 data s heet rev 004 december/14 14.6 usb connector one of the communication possibilities with the host pc is the usb link. see chapter usb communication with host for more details 14.7 rs 232 connector one of the communication possibilities with the host pc is the serial communication. see chapter rs communication with host for more details 14.8 reset button this button is connected to all reset lines in the main board as well as on the daughterboard . this button allows the user to reset the whole programmer after crashing software and when co nnected also to the application device under test. 14.9 daughter board connectors the main board has two connectors to the interface with the application. the ptc allows the addition of a full pcb in between the main board and the interface. this daughter boar d can be mounted on the two connectors. in some exceptional cases, a daughter board contains only a few wires from the analog connector to the application connector . the connectors are described below . figure 14 - 5 : daughter board connectors a5 shtd_pps2 shtd_pps1 fc +2.5v_ref_supply meas_line_n3 f8 rd ana.comp0 d1 meas_line_n4 reset ana.comp1 a4 meas_line_p2 a1 agnd pe5 agnd shtd_pps4 vout_pps1 meas_line_p1 vout_pps4 pe0 meas_line_p3 fe isense_pps2 isense_pps4 d2 meas_line_n2 analog db connector 48 pin header 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 35 37 36 38 39 40 41 42 43 44 45 46 47 48 d7 isense_pps3 d0 ff d3 digital db connector 40 pin header 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 vout_pps2 fb a3 fa f9 wr pe1 pe7 sda ana.comp2 meas_line_p4 pe6 pe2 a2 pe3 ana.comp3 isense_pps1 fd shtd_pps3 a7 d5 dgnd a6 scl meas_line_n1 d6 vout_pps3 +36v_supply +5v_digital_supply d4 a0 pe4
ptc04 programmer for melexis ptc devices 3901290014501 page 10 of 15 data s heet rev 004 december/14 14.9.1 digital db connector (40 pins) mainly, the digital connector is meant to expand the programmer for extra needs. address lines a0 - a7 together with the map select lines f8 - ff allows the user direct access to an area of 2 k . example would be adding a simple addressed i/o register by using the selection lines. if more complexity is needed, a full fpga can be mounted on the db board . pins names description 1 C 8 a0 C a7 address lines 9 C 16 d0 C d7 data lines active durin g rd or wr signals 17 rd read : a negative pulse will indicate a sampling of the data on the data bus 18 wr write : a negative pulse will indicate when data is available on the data bus 20 reset this signal goes low by powering the ptc or by pressing t he reset button. this line can be pulled low by application. check firmware documentation for resetting by software. 21 - 22 scl / sda i2c bus 23 - 30 f8,f9,,ff cs lines when the address areas are accessed 31 - 38 port e note: these pins are limited to 5 vol t input \ output. the full port e of the atmega core is mounted to these pins. this allows us to use advanced features like pwm, uarts, time measurements, etc. by using firmware that supports these functions, really nice application specific requirements can be fulfilled. 39 dgnd digital ground 40 +5v digital 5 volt digital supply. maximum current to get out of this supply : .ma table 7 : digital daughter board connector note: all the pins are limited to 5 volt input \ output. howeve r, there are protections, please take precautions in order to avoid damage to the main board. 14.9.2 analog db connector (48 pins) mainly, the analog connector provides all the analog signals and measure possibilities. pins names description 28,32,36 pps 1 - 3 ou tput of the programmable supplies 40 pps 4 output of the fast dac programmable power supply 27,31,35,39 isense_pp1 - 4 outputs (driver outputs before rsens) for current evaluations. these outputs could be used to connect to the analog comparators in order to create fast digital signals based on current. 2,4,6,8 extmeas1 - 4pos there are 4 differential inputs for making meas urements 10,12,14,16 extmeas1_4neg the negative inputs of extmeas1 - 4pos 17,19,21,23 shtd_pps1 - 4 outputs that show the status of the dri vers. signals are meant to connect leds for the front panel 43,44,47,48 anacomp0 - 3 see *note. input (limited to 5v) fast level comparators in order to remove time consuming measurement 18 +35v_supply supply to extend the daughter board with some extra d rivers 20 nc not connected 24 +2.5v ref output of internal reference all other agnd analog ground table 8 : analog daughter board connector note: all the pins are limited to 35 volt input \ output! however, there are protections, please take precautions in order to avoid damage of the main board. * note: some pins are protected and limited to 5 volt! however, there are protections, please take precautions in order to av oid damage of the main board.
ptc04 programmer for melexis ptc devices 3901290014501 page 11 of 15 data s heet rev 004 december/14 15. daughter board concept 15.1 backgroun d the future of our products is not known and building a universal programmer will not be possible to survive more than a few years. for this reason, a flexibility is built in by having a daughter board (abbreviation: db) as interface between ptc04 and the application connector. on this way, special needs can be fulfilled. the simplest db is just wires form the db connectors to the application connector. the idea is to support with one single db as many as possible products. 15.2 requirements see specific daugh ter board documentation . 16. rs 232 communication with host this page describes all items concerning the hardware of the rs232c communication link. information about the protocol is explained in the software documentation. 16.1 connector db9 - male description 2 r xd 3 txd 5 gnd table 9 : rs232 connection (at the computer and at the ptc04) 9 pin d - sub male at the computer. 16.2 cable the cable between ptc and host pc is a standard null - modem cable for rs232c cable description: db9 - fem db9 f em description 2 3 rxd / txd 3 2 txd / rxd 5 5 gnd table 10 : rs232 cable
ptc04 programmer for melexis ptc devices 3901290014501 page 12 of 15 data s heet rev 004 december/14 16.3 settings the microprocessor core has a fixed setting to communicate with the host. used settings are as follows : parameter value baud rate 115, 2 kbps bits 8 parity no flow control none stop bits 1 table 11 : rs232 settings 17. usb communication with host universal serial bus (usb) is used (v1.0) developed by compaq, hewlett - packard, intel, lucent, microsoft, nec and phillips. 17.1 c onnectors pin name description 1 vbus +5 vdc 2 d - data - 3 d+ data+ 4 gnd ground table 12 : usb connection 17.2 cable default: usb a (at the connector) to plug into a pc usb b (at the connector) to plug into the ptc04 series "a" plugs are used towards the host system and series "b" plugs are used towards the usb device. 17.3 settings two drivers have to be installed and are available in one executable on the software cd.
ptc04 programmer for melexis ptc devices 3901290014501 page 13 of 15 data s heet rev 004 december/14 18. measurement system the measurement syst em on the main board contains mainly a high accurate 16 bit adc and two 16 to 1 channels mux . basically, the adc always measures differential between inputs. for the internal voltage channels, the negative input is the internal analog ground. for the curr ent measurements that use a sense resistor (pps1 - 4) are clearly measuring over the sense resistor. there are also 4 full differential lines going to the daughter board allowing the user to make high quality measurements by selecting the reference by the ap plication itself. this way of working easily supports the use of force and sense lines. 18.1 channels nr. pos input neg input description 0 vout pps1 internal agnd output voltage pps1 1 v driver pps1 vout pps1 output current pps1 2 vout pps2 internal agnd o utput voltage pps2 3 v driver pps2 vout pps2 output current pps2 4 vout pps3 internal agnd output voltage pps3 5 v driver pps3 vout pps3 output current pps3 6 vout pps4 internal agnd output voltage pps4 7 v driver pps4 vout pps4 output current pps4 8 supply driver: +35/2 internal agnd driver supply divide by 2 9 supply analog : +5 v internal agnd analog 5v supply 10 supply digital : +5 v internal agnd digital 5v supply 11 reference : +2.5v internal agnd reference voltage for dac \ adc 12 db_ana_c onn pin 2 db_ana_conn pin 10 daughterboard meas. channel 1 13 db_ana_conn pin 4 db_ana_conn pin 12 daughterboard meas. channel 2 14 db_ana_conn pin 6 db_ana_conn pin 14 daughterboard meas. channel 3 15 db_ana_conn pin 8 db_ana_conn pin 16 daughterboard meas. channel 4 table 13 : adc measurement channels 18.2 conversion time in general the conversion time depends o n the loaded firmware version. theoretically, a full conversion to a floating real value takes about 4ms if the filter is p ut at 100 samples. 18.3 accuracy to preserve the accuracy of the ptc04, melexis recommends checking the tolerance of the ptc04 once a year.
ptc04 programmer for melexis ptc devices 3901290014501 page 14 of 15 data s heet rev 004 december/14 19. application information when using the pt c04 in combination with external equipment or other ptc04s, it is very impo rtant to have a good solid ground connection between the different appliances. a bad ground connection between appliances and the ptc04 can cause damage to the ptc04. the measuring unit and the digital channels of the ptc04 are sensitive to level shifts. when using the ptc04 for end of line calibration of a melexis product, i t is mandatory to use qualified reference equipment f or the end of line verification of the programmed/calibrated product . 20. faq please refer to the document faq_ptc04.pdf 21. mechanical outlines figure 21 - 1 : mechanical outlines 22. esd precautions electronic semiconductor products are sensitive to electro static discharge (esd). always observe electro static dis charge control procedures whenever handling semiconductor products.
ptc04 programmer for melexis ptc devices 3901290014501 page 15 of 15 data s heet rev 004 december/14 23. disclaimer devices sold by melexis are covered by the warranty and patent indemnification provisions appearing in its term of sale. melexis makes no warranty, express, statutory, implied , or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. melexis reserves the right to change specifications and prices at any time and without notice. therefore, prior to de signing this product into a system, it is necessary to check with melexis for current information. this product is intended for use in normal commercial applications. applications requiring extended temperature range, unusual environmental requirements, en d of line - calibration or high reliability applications, such as military, medical life - support or life - sustaining equipment are specifically not recommended without additional processing by melexis for each application. melexis makes no warranty, express, statutory, implied, or by description regarding such applications, in particular with regards to end of line verification, in which case it is explicitly recommended that qualified equipment is used. the information furnished by melexis is believed to be c orrect and accurate. however, melexis shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interrupt of business or indirect, special incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. no obligation or liability to recipient or any third party shall arise or flow out of melexis rendering of technical or other services. ? 2014 melexis nv. all rights reserved. 24. contact information for the latest version of this document, go to our website at www.melexis.com or for additional information contact melexis direct: europe, africa, asia: am erica: phone: +32 1367 0495 phone: +1 248 306 5400 e - mail: sales_europe@melexis.com e - mail: sales_usa@melexis.com iso/ts 16949 and iso14001 certified

▲Up To Search▲

Price & Availability of PTC04-DB-FASTLOADER

	To Download PTC04-DB-FASTLOADER Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .